MG144-G04 Panzerschnellbrücke 2 Bridgelayer

German

144th (10 or 12mm)

Leopard 2 bridgelayer.

Note: due to the small size of the model and sheer complexity of the way the bridges are placed, attempting to make all three removable is not practical, so this version of the model only has the upper bridge removable, which sits on the top between the pegs.

Size (Bounding Box, assembled): 97.6mm x 28.6mm x 26.1mm

Physical Print: Two vehicles supplied.

Digital Files:

Locking turrets: N/A

Supports: Not available at this time, sorry.

Scaling Notes: Red. Parts adversely affected by scaling: Wall thickness, thin parts (e.g.gun barrels, track thickness), fit of locking turrets.

Photo of VPN print (Shapeways).

For Resin/SLS Printing: Use files 1revisedhull, 1revbridge

For FDM Printing: Use files 1solidrevisedhullleft, 1solidrevisedhullright, 1revbridge

(Print additional bridge sections if you want/need to have all three parts laid.)

Note: The prototype hull sans lower two bridges technically exists as a file (though it still has the failed artifically added rails to support said lower two bridges, which is why I did not include it here); so if you have an absolute requirement to have the model without the bridges on for, like a diarama or something, please feel free to contact me.