MG144-DZ03 ZSD-349 APC
By Aotrs Shipyards
9 views
Translation missing: en.product_price.item.price.range_html
Original price
£17.83
£17.83
from £17.83
Current price
£17.83
| /
DHZ
ZSD-349 HIFV (with choice of two turrets)
Scale: 1:144th (10/12mm)
Size (Bounding Box, assembled, ZSL-336 turret): 47.02mm x 24.42mm x 20.53mm
Physical Print: Three vehicles supplied, each with an alternate turret.
Digital Files:
Locking turrets: Primary
Supports: Not available at this time, sorry.
Scaling Notes: Red. Parts adversely affected by scaling: Wall thickness, thin parts (e.g.gun barrels, track thickness), fit of locking turrets.
Entirely Optional Lore PDF included.
Photo of FDM print. (Prusa I3 Mk3)
For Resin/SLS Printing: Use files 2solidM hullsmallturret, 2solidR turretZSL336 (ZSL 10) or 2solidR turretZSD315 (ZSD-89) (or alternately 2solidM hullsmallturretnoERA)
For FDM Printing: Use files 2solidR hullsmallturret, 2solidR turretZSL336 (ZSL 10) or 2solidR turretZSD315 (ZSD-89) (or alternately 2solidR hullsmallturretnoERA)
As the impetus to ramp-up the army hit its stride, the DHZ’s replacement of its MBTs was a high priority. There were still many (too many) ZTZ-285s in service and of those, second or third-line garrison units still had not had their electronics upgraded.
Rather than waste these hulls entirely, given their ease of maintenance and reliability, the ZTZ-285 chassis was used as the basis for a new family of Heavy APCs and IFVs.
These became the ZSD-349 HAPC and HIFV.
The tank hull has been substantially overhauled, being extended and raised. The suspension was reinforced to take 11 tons of extra weight, mostly from enhanced armour. The power plant was replaced with a more powerful one to propel the new 45-ton weight.
The HAPC variant can carry up to 8 troops, though typically only actually takes six or seven, due to the heavy infantry’s weapons load. It is armed with a pintle HMG turret. The majority of these are used from the ZSL-336 stock, but several units have been spotted using the older ZSD-315 turrets, which are smaller and not quit as well protected against small arms. It is believed that the difference is likely to be what is available in stores at local level.
ZSD-349 HIFV (with choice of two turrets)
Scale: 1:144th (10/12mm)
Size (Bounding Box, assembled, ZSL-336 turret): 47.02mm x 24.42mm x 20.53mm
Physical Print: Three vehicles supplied, each with an alternate turret.
Digital Files:
Locking turrets: Primary
Supports: Not available at this time, sorry.
Scaling Notes: Red. Parts adversely affected by scaling: Wall thickness, thin parts (e.g.gun barrels, track thickness), fit of locking turrets.
Entirely Optional Lore PDF included.
Photo of FDM print. (Prusa I3 Mk3)
For Resin/SLS Printing: Use files 2solidM hullsmallturret, 2solidR turretZSL336 (ZSL 10) or 2solidR turretZSD315 (ZSD-89) (or alternately 2solidM hullsmallturretnoERA)
For FDM Printing: Use files 2solidR hullsmallturret, 2solidR turretZSL336 (ZSL 10) or 2solidR turretZSD315 (ZSD-89) (or alternately 2solidR hullsmallturretnoERA)
As the impetus to ramp-up the army hit its stride, the DHZ’s replacement of its MBTs was a high priority. There were still many (too many) ZTZ-285s in service and of those, second or third-line garrison units still had not had their electronics upgraded.
Rather than waste these hulls entirely, given their ease of maintenance and reliability, the ZTZ-285 chassis was used as the basis for a new family of Heavy APCs and IFVs.
These became the ZSD-349 HAPC and HIFV.
The tank hull has been substantially overhauled, being extended and raised. The suspension was reinforced to take 11 tons of extra weight, mostly from enhanced armour. The power plant was replaced with a more powerful one to propel the new 45-ton weight.
The HAPC variant can carry up to 8 troops, though typically only actually takes six or seven, due to the heavy infantry’s weapons load. It is armed with a pintle HMG turret. The majority of these are used from the ZSL-336 stock, but several units have been spotted using the older ZSD-315 turrets, which are smaller and not quit as well protected against small arms. It is believed that the difference is likely to be what is available in stores at local level.
Files Included
Files are available in your Only-Games Library after purchase.
No files are listed for this option.
Shipping information
Produced by: Only-Games
Ships in 5–10 working days
| Zone | Cost |
|---|---|
| UK | £5.99 |
| North America | £9.50 |
| EU | £11.20 |
| Rest of Europe | £10.00 |
| Rest of the World | £15.00 |
Returns & warranty
If something arrives missing, broken, or badly misprinted, our replacement process has you covered.